How to stain your deck
Deck Staining Tips
Deck Staining Tips
Remember its important to coat your wood or stain your deck regularly, especially if you live in area with high sun strength, minimum every 2 years… Are you looking to freshen the appearance of your old worn down wood decking?
Well it’s that time of year again.We missed our window of opportunity last year, and now that wood deck is really starting to look somewhat weathered, a little worse off than last year perhaps.
If that’s the case here are some of the things we should start looking for. Wood decks always take their toll from the elements as you well know. If you don’t have a deck cover or roof to prevent the elements from lying on your wood deck then it’s time to clean, scrub and stain a little more often than those decks with a cover.
When should you Stain your Deck
According to the pros, the best way to tell if you need to re-coat your deck is by placing a bit of water on your wood. If it beads up, you’re good to go. If it doesn’t and absorbs its way thru the wood then you can imagine what a winters worth of rain and snow will do to your deck. This means the old stain has worn away and it’s time to stain.
If you let it go, your wood will eventually turn gray and begin to rot. If you can help it don’t let this happen, set aside a week-end and do your due diligence. It will be worth it.
Once your decision to stain is made up, now you need to prepare the surface. Do all that is needed to get the wood surface stain ready? If it’s needed, clean, sand and scrub the surface as smooth as you can get it.
In extreme cases the use of power washer is worth the time especially if your wood has turned black due to mildew, mold and algae sometimes a power washer mixed with a good wood surface cleaning agent and a wood brightener will be sufficient enough to get your deck ready.
The use of cleaners requires a little time like 10-15 minutes or so to allow for the cleanser to work and do its job, after you determine the right amount time then re-rinse your wood and allow it to dry.
Check for loose boards and other protruding slithers by sanding them down. Older decks usually have nails, remove the loose nails and use rust proof colored deck screws to keep loose boards down.
Remember the optimum temperature to stain a deck is between 55 and 85 degrees.
Deck stain application
Avoid applying the stain in direct sunlight and if you can, then remember this, many hands makes for light and quick work. The idea behind direct sunlight is that you dont want your stain to dry before you can finish the end of one board otherwise you’ll have lap marks and uneven coloring patterns.
The Remodeler Oct 23, 2017